How to go up and down the stairs in a wheelchair
Update:09-09-2021
Summary:
The two leaned up the stairs
The wheelchair has to face the steps. Two people are in front of the Guangdong wheelchair and the other is behind the wh...
The two leaned up the stairs
The wheelchair has to face the steps. Two people are in front of the Guangdong wheelchair and the other is behind the wheelchair. It is recommended that people with stronger strength stand behind. People in the back should have one foot up and one foot down. The person in front grabbed the frame on both sides of the wheelchair. This allows you to get close to the frame, making it easier to apply force.
Two people helped down the stairs
The wheelchair is facing the steps. The position of the guide is the same as when going up the stairs. The person in front firmly grasps the front frame of the wheelchair, and the person behind grabs the push handle (the person behind uses one foot on the anti-roll bar or only presses the push rod to make the wheelchair tilt backward and maintain balance. The people behind lifted the wheelchair down the steps together. Pause the adjusted posture and continue to push the wheelchair forward until there is enough space to put down the front wheels.
Ningbo Shenyu Medical Equipment Co., Ltd. is a professional China Aluminum Manual Wheelchairs Suppliers and Aluminum Manual Wheelchairs factory, we are has a full set of testing and production equipment, and have an experienced management team and strong technical development force. throughout note technic development and product innovated, have a professional R&D team, have a complete production system from product design→Sample making→finished product.
Ningbo Shenyu Medical Equipment Co., Ltd. is a professional China Aluminum Manual Wheelchairs Suppliers and Aluminum Manual Wheelchairs factory, we are has a full set of testing and production equipment, and have an experienced management team and strong technical development force. throughout note technic development and product innovated, have a professional R&D team, have a complete production system from product design→Sample making→finished product.
